Enclosure:Enclosed || Seat Type:Air_Ride || Climate Control:Heat_and_Air || Keyless Start:Yes || Operator Controls:Foot || Engine:Diesel || Horsepower:65 || Block Heater:Yes || Lift Type:Vertical || Bucket:Yes || Bucket Size:68 || Quick Attach:Hydraulic ||
MoreLess
Limited Time Offer!
Selling Price -$25,000.00
2020 New Holland Construction Skid Steer Loaders L220
HANDLE BIGGER LOADS AND MOVE ‘EM FASTER
No matter what your line of work — landscaping, farming or construction — you’ll complete your jobs more effectively with a New Holland 200 Series skid steer loader. It’s the skid steer you would want on the job — one that’s durable, reliable and productive.
Features may include:
Excellent dump height and reach
- The patented New Holland Super Boom® vertical lift linkage delivers maximum reach at maximum height, allowing you to precisely place loads in the center of trucks.
Rock solid stability
- A smooth, stable ride results from a new, longer wheelbase, low center of gravity and correct frontto- rear weight distribution.
Excellent visibility
- Better visibility allows you to work more confidently and quickly to improve your overall efficiency. A lower door threshold allows for better sightlines to the bucket cutting edge and to the trench, and the see-through area on the cab roof provides a clear view to the bucket at full height. Rear visibility is among the best in the industry due to a large window, low engine hood and no rear frame towers.
Service made easy
- Long service intervals mean New Holland skid steers spend less time in the shop. The swingout rear door and hood provide easy access to maintenance checkpoints. You can access engine oil, fuel fill, hydraulic oil, coolant and radiator points without tools.
Unmatched access
- The entire cab and boom lift assembly tilts forward for unrivaled access to components and easy cab cleanout.
Built-in comfort
- The wide cab offers superior operator comfort and visibility to critical areas, allowing operators to work with a new level of confidence and speed.
- 2020
- New Holland Construction
- Skid Steer Loaders
- L220
- General
- Manufacturer/model: ISM / N844LTA
- Horsepower per SAE J1349 Gross hp (kW): 67 (50) @ 2800 rpm | Horsepower per SAE J1349 Net hp (kW): 64 (47.7) @ 2800 rpm
- 135 in3 (2.2 L)
- Peak: lb-ft (Nm) 153 (208) @ 1800 rpm
- 3.31 in (84 mm)
- 3.94 in (100 mm)
- Air intake: Turbocharged Aftercooled with external EGR
- HPCR Direct
- Travel speed, low range, mph (km/h): 7.8 (12.5)
- Breakout force, lift cylinder, lbs (kN): 3450 (15.3) | Breakout force, bucket cylinder, lbs (kN): 7300 (32.5)
- Pump flow, Standard Flow, gpm (Lpm): 20.6 (78)
- Relief pressure, psi (bar): 3046 (210)
- Dump angle, degrees: 52 | Rollback, bucket on ground, degrees: 34 | Angle of departure, degrees: 25
- Bucket hinge pin, in (mm): 121 (3073) | Top of ROPS, in (mm): 78.7 (1998) | Bottom of level bucket, fully raised, in (mm): 114.3 (2902) | Dump reach (max height), in (mm): 29.8 (758) | Rollback, bucket at full height, degrees: 88
- without attachment with coupler, in (mm): 105.7 (2697)
- 69.1 in (1755 mm)
- 44.4 in (1128 mm)
- bottom of belly pan: 8 in (203 mm) | Clearance circle without bucket, in (mm): 50.7 (1289) | Clearance circle rear, in (mm): 62.9 (1599) | Rear axle to bumper, in (mm): 36.4 (924)
- Rated operating load, 50% tip, lbs (kg): 2000 (905) | Tipping load, lbs (kg): 4000 (1814)
- Operating weight, lbs (kg): 6470 (2930)
- NEM475483
- $25,000.00
- Fulton
- Pre-Owned
- Y43921
- 2020
- New Holland Construction
- Skid Steer Loaders L220
- Manufacturer/model: ISM / N844LTA
- 3983
- Available
- Bucket hinge pin, in (mm): 121 (3073) | Top of ROPS, in (mm): 78.7 (1998) | Bottom of level bucket, fully raised, in (mm): 114.3 (2902) | Dump reach (max height), in (mm): 29.8 (758) | Rollback, bucket at full height, degrees: 88
- NEM475483